Some electrical work gets planned weeks in advance. A kitchen remodel needs circuits roughed in before the drywall goes up. An EV charger installation goes on the calendar when the car arrives. A panel upgrade gets scheduled around a contractor's timeline. That kind of work moves at the pace of a project, and scheduling it early means the rest of the job doesn't stall waiting on power.
Other calls come in the same morning something stops working. A breaker won't reset. An outlet is dead and the tenant is asking questions. A ceiling fan was installed over the weekend and now the switch doesn't behave. Current Electric handles both speeds for Santa Clara, and same-day service is available when the work can't wait. We're open every day from 5:30 AM to 9:30 PM. Call (650) 614-5391 for a quote.
A city of this size generates a wide range of electrical calls. High-density residential buildings, commercial properties, and single-family homes all produce different kinds of work, and the situation that leads to a call is rarely the same twice. Here is how the most common categories break down.
A tripped breaker that resets and trips again, an outlet that stopped working with no obvious cause, lights that flicker on one circuit while everything else runs fine. These calls usually point to a fault somewhere in the wiring or at a connection, and finding it requires more than swapping the obvious part. We trace the circuit, test what's feeding it, and fix the actual problem rather than the symptom. Wiring work is checked against code before sign-off.
Older construction in Santa Clara often carries a panel that was sized for a much lighter electrical load than the property now demands. When a building adds EV charging, rooftop solar, or a significant appliance circuit, the panel has to be evaluated before anything else gets wired. We handle load calculations, breaker replacement, full panel upgrades, and service-entrance work when the capacity isn't there. AFCI and GFCI protection gets addressed as part of the same project.
New circuits, outlets, switches, lighting fixtures, ceiling fans, and outdoor wiring all fall under installation, and each one involves its own set of code requirements. The situation might be a bathroom remodel that needs GFCI protection added, a garage that needs a dedicated circuit for a compressor, or a commercial space being reconfigured for a new tenant. The service page carries the full breakdown of what we install and where. We'll get the job wired and finished.
For residential and commercial electrical work alike, the calls we get most often come down to a handful of job types. Each one has its own set of considerations, and we handle all of them for properties throughout the city.
A stairwell, a hallway, a large open-plan room: anywhere you need to control a light from more than one point requires three-way or multi-location switching. The wiring behind it is more involved than a standard switch replacement, and getting it wrong means the switches fight each other instead of working together. We wire these correctly the first time and test every position before we leave.
Replacing a light fixture with a ceiling fan is not always straightforward. Many older boxes were not rated for the weight and movement a fan puts on them, and the wiring may not include a separate conductor for the fan motor and the light kit. We assess the box, upgrade it where needed, and wire the fan so both functions work independently if that's what the installation calls for.
Running power to a structure that sits away from the main building involves its own set of decisions: underground versus overhead, the size of the circuit, whether a subpanel makes sense, and how the run needs to be protected along the way. Electric gate operators add a control circuit to the picture. We handle the whole run from the main panel out to the structure, including any trenching coordination the job requires.
Aluminum branch-circuit wiring from the 1960s and 70s, knob-and-tube installations that have been modified over the decades, and circuits that were added without proper documentation all create situations where the wiring itself is the problem rather than any single component. Aluminum-wiring remediation may involve replacing devices with CO/ALR-rated equipment or replacing the branch circuits entirely, depending on what the inspection finds. Partial rewiring addresses the areas that need it without touching what's still sound.
An outdoor outlet that isn't properly protected is a code problem and a safety problem. We install weatherproof outlets and in-use covers in the locations that need them, including patios, exterior walls, and areas near water where GFCI protection is required. The next job gets earned by doing this one right, and outdoor wiring is one of the places where cutting corners shows up quickly.
Same-day service is available for most repair calls in Santa Clara, and for urgent situations that come up during our hours, 5:30 AM to 9:30 PM every day, we can often get someone out without pushing to the following week.
When you call, we go through the scope on the phone. That means you know what the work involves and what it costs before anything is scheduled. For a tenant situation where access has to be coordinated, or a business that needs the work done during a window that doesn't affect operations, we work around those constraints when we book the visit.
We answer when you call. We explain the work. We leave it safe.
On a renovation or a build-out, the order of trades matters more than most people realize until something goes wrong. Rough-in wiring has to happen before insulation and drywall, and the panel capacity has to be confirmed before any new circuits are planned. When the electrician shows up after the walls are closed, the cost and the disruption both go up.
We work with contractors, property managers, and homeowners who are coordinating multiple trades on the same project. If you're planning a kitchen remodel, a garage conversion, or a commercial tenant improvement, the right time to get us on the schedule is before the other work starts, not after. We'll confirm what needs to happen at each stage so the project doesn't stall waiting on power.
Pick the date. We do the wiring. We clean up after.
The price for electrical work depends on what the job actually involves. A single outlet replacement is scoped and priced differently than a panel upgrade or a rewire. What affects a quote includes the complexity of the circuit, whether the panel needs to be involved, how much new wiring needs to be run, and whether any code upgrades are required along the way.
When you call, we go through the scope and give you a rate before anything is scheduled. You know what it covers before we book the visit. If something comes up during the job that changes the scope, we explain it before proceeding. Call (650) 614-5391 and ask what it covers. You'll get a straight answer.
When we finish a job, the work doesn't just have to function. It has to be documented. Circuits get labeled at the panel so anyone who opens it later knows what feeds what. GFCI and AFCI protection is tested and confirmed. Wiring is checked against code before sign-off, and any permits required for the work are handled through the proper process.
That documentation matters when a property changes hands or a landlord re-lets a unit. A buyer's inspector will look at the panel, check the protection devices, and ask whether permitted work was properly closed out. A clean record from the original installation makes that process straightforward rather than complicated. We're a local electrician for homeowners and property managers who want the paperwork to hold up as well as the wiring does.
We serve Santa Clara and take on work throughout the surrounding area. That includes Sunnyvale, Cupertino, Campbell, and the communities of Burbank and Fruitdale. If you're elsewhere in Santa Clara County and want to confirm we cover your address, call and we'll let you know.
For what the job actually entails, our page on electrical repairs lays it out.
We use drop cloths and take steps to contain debris to the work area. Where cutting into walls or ceilings is involved, we seal off adjacent spaces where practical and clean up the work area before leaving each day.
Yes. A circuit mapping visit identifies what each breaker controls, labels the panel, and documents the layout. This is useful for older properties where the panel directory is missing, incorrect, or has never been filled in.
On multi-day projects we restore power to as much of the property as possible at the end of each working day. We confirm what will and will not be live overnight before we leave so there are no surprises.
A momentary voltage drop when a motor-driven appliance starts is normal in small amounts. If the dimming is significant, lasts more than an instant, or affects multiple circuits, it can point to an undersized service, a weak connection, or a panel that needs attention. Call us and we can assess whether it warrants a service call.
The amount of disruption depends on whether walls need to be opened. Surface work and panel work produce minimal debris. Rewiring or running new circuits through finished walls involves more dust and patching, and we take reasonable steps to contain it during the job.
We handle both residential and commercial electrical work throughout Santa Clara. That includes office and retail spaces, tenant fit-outs, multi-unit residential buildings, and property manager requests across multiple units or locations. The scope and scheduling for commercial work often involves coordinating around business hours or tenant access, and we work around those constraints when we book the visit.
Santa Clara has a mix of older single-family homes, newer construction, and a significant amount of multi-unit and commercial property. Older homes often need GFCI and AFCI protection added, aluminum-wiring remediation, or a panel upgrade to handle modern loads. Newer construction and commercial properties more often call for additional circuits, EV charger installation, or tenant improvement wiring. The situation at your property shapes the scope, and we go through it on the call before anything is scheduled.
We stop and explain what we found before doing anything beyond the original scope. You decide how to proceed with full information about what the additional work involves and what it costs.
We confirm the sequence with you before booking. Electrical rough-in needs to happen before drywall, and trim-out happens after. If we are one of several trades on a renovation, we work around the schedule you give us and flag any dependencies that could affect timing.
Current Electric is ready to take your call for electrical repairs, panel upgrades, EV charger circuits, rewiring, and any other electrical work in Santa Clara. Real electricians. Real pricing. Real fast response.
Call (650) 614-5391 for a quote. We're open every day from 5:30 AM to 9:30 PM, and same-day service is available for calls that can't wait.
We also work in: Sunnyvale, Cupertino, Milpitas, Mountain View, Palo Alto.
Below is a quick look at the electrical services we handle for homes and businesses in Santa Clara and the surrounding Peninsula. Each row covers what the service includes, who it fits best, and a practical note to help you decide whether to call. If you have questions about a specific job, call us and we will walk through the scope with you before anything is scheduled.
| Service | What It Covers | Best For | Things to Know |
|---|---|---|---|
| Whole-Home Surge Protection | panel-level surge protector installationgrounding and bonding checkprotection for EV and solar equipmentelectrical safety inspection pairing | homes with EV chargers, solar inverters, or a high density of connected devices | A surge protector at the panel covers everything in the house. Individual power strips at outlets do not provide the same level of protection. |
| Lighting Installation | recessed lighting installationfixture replacementAFCI breaker installationwhole-room lighting circuits | homeowners remodeling a room or updating fixtures throughout the home | California code requires arc-fault protection in bedrooms and living areas. We handle AFCI installation as part of lighting work where required. |
| Electrical Panel & Service Upgrades | 200-amp service upgradessubpanel installationload calculationsservice entrance and meter upgrades | older homes being renovated or adding EV chargers, solar, or high-draw appliances | Wiring work is checked against code before sign-off. Many Santa Clara homes still carry 100-amp service that was never sized for today's loads. |
| Electrical Repairs & Troubleshooting | fault diagnosis and circuit testingGFCI and AFCI protection checksgrounding and bonding issuesworn breaker replacement | homeowners dealing with flickering lights, dead outlets, or recurring faults | Same-day service is available for most repair calls. Waiting on an electrical fault usually makes it worse, not better. |
| Dedicated Appliance Circuits | dryer and range circuitsdishwasher and refrigerator circuitsworkshop and garage circuitshot-tub circuit installation | homeowners adding major appliances or a workshop that needs its own power supply | Sharing capacity with the rest of the house causes nuisance trips and can shorten appliance life. A dedicated circuit fixes that. |
| EV Charger Installation | Level 2 charger circuit installationpanel capacity assessmentpanel upgrade if load requires itfuture-capacity planning | EV owners who want reliable home charging without relying on a standard outlet | EV adoption in Santa Clara County is among the highest in the country. We size the circuit for the charger you have and plan ahead for a second vehicle if needed. |
| Outlet & Switch Installation | standard and GFCI outlet installationswitch replacement and upgradesadding outlets to underserved roomscode-required ground-fault protection | homeowners updating kitchens, bathrooms, garages, or outdoor areas | Kitchens, bathrooms, and outdoor areas all have specific code requirements for GFCI protection. We make sure the work meets those standards. |
| Solar & Battery Backup | solar system electrical wiringbattery storage circuit installationservice entrance and subpanel upgradesbackup generator hookup and transfer switch | homeowners adding rooftop solar, battery storage, or a generator for outage resilience | We work on the electrical side of solar and battery installations. California's public-safety power shutoffs have made outage planning a real priority in this area. |
| Wiring & Circuit Installation | new circuit runshome addition and remodel wiringolder-home rewiringconduit and cable work | renovations, additions, and homes where original wiring is no longer adequate | Rewiring scope depends on the home's age, the condition of existing wiring, and what the new load demands are. We assess before recommending. |
| Breaker & Fuse Repair | breaker testing and replacementfuse panel assessmentnuisance trip diagnosisload evaluation | homes where breakers trip repeatedly under normal use | A breaker that trips repeatedly is telling you something. We find the cause rather than just resetting it. |
| Ceiling Fan Installation | fan and wiring installationbox and support upgrade where neededswitch and control wiring | rooms that need better air circulation without adding a new circuit | Many older ceiling boxes are not rated for fan weight. We confirm the box and support before installation. |
| Electrical Safety Inspections | arc-fault and ground-fault gap identificationgrounding and bonding reviewpanel condition assessmentpre-purchase and pre-sale inspection | buyers, sellers, landlords, and owners of older homes that have not been inspected recently | Santa Clara has a lot of mid-century housing where original wiring is still in place. An inspection identifies what needs attention before adding load to the system. |
Every job is different, and a quick call is the fastest way to get a straight answer about what your electrical work actually involves. Call (650) 614-5391 and we will walk through the scope with you before anything is scheduled.
(650) 614-5391