When something goes wrong with the wiring in a Campbell home or business, the first question is usually whether the fix is a small repair or a larger project. That question deserves a straight answer before any work is scheduled, not after. We handle the full range of residential and commercial electrical work in Campbell, from a single outlet that stopped working to a complete service upgrade, and the call is where the scoping happens.
We take calls at any hour, any day of the week, including nights, weekends, and holidays. Whether the job is a tripped breaker that will not reset, a panel that cannot carry the load of a modern household, a new EV charger circuit, or wiring for a garage workshop, we cover it. You get a straight answer about the work before it is scheduled.
Electrical work that is done and then forgotten creates problems down the road. When a homeowner sells a property, a buyer's inspector will look at the panel, check for GFCI and AFCI protection, and note anything that does not match current code. If the work was done without a permit where one was required, or if circuits were added without updating the panel labeling, those gaps show up at the worst possible moment.
When we finish a job, the panel is labeled accurately, any new circuits are documented, and the work area is left as it was found. That is not a bonus, it is part of the job. A rental property with accurate documentation is easier to manage and easier to hand off when tenants change.
A standalone electrical safety inspection covers the panel condition, grounding and bonding, GFCI and AFCI protection throughout the home, visible wiring, and load capacity. It gives a clear picture of where the system stands and what, if anything, needs attention. For older homes in Campbell, where the wiring may not have been touched in decades, an inspection is a practical starting point before any renovation or before a property changes hands.
Aluminum branch-circuit wiring and ungrounded systems are present in the Bay Area housing stock from certain eras of construction. We identify what is there, explain what it means, and give a plain answer on repair versus upgrade. Aluminum-wiring remediation is work we handle directly, and it involves specific methods at each connection point rather than a full rewire in most cases.
Electrical pricing is not a flat number pulled from a chart. What the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change are the things that move a quote up or down. A breaker replacement is a different scope than a panel replacement. Running a new circuit to a garage depends on how far the wire has to travel and what the panel currently holds.
When you call, we ask the right questions to scope the job accurately. You get a rate before anything is scheduled, and the scope is explained so you know what the work covers. If what we find on site changes the picture, we explain why before continuing. The scope of the electrical work is priced before it starts, and that is how it stays.
What would change a quote from the initial call includes the condition of the existing wiring once it is accessible, whether a panel upgrade is needed to support a new circuit, and whether permit requirements apply to the job at your address. We confirm what applies before work begins.
A portable or standby generator is only as useful as the connection between it and the home. A properly wired transfer switch isolates the home's electrical system from the utility before the generator is connected, which prevents back-feeding onto the lines. In a region where public-safety power shutoffs during wildfire season are a real possibility, having that connection done correctly matters. We wire the transfer switch, connect the generator circuit, and confirm the critical loads are covered.
EV adoption across the Bay Area runs well ahead of the national average, and a Level 2 home charger requires a dedicated 240-volt circuit sized to the charger's amperage. The panel has to have the capacity to carry the added load before that circuit can be added. We check the panel on the call, confirm what the circuit needs, and price the installation before anything is scheduled. A panel that is already at capacity may need an upgrade first.
A detached garage or workshop that needs more than a couple of circuits is often better served by a subpanel than by running individual circuits from the main panel. A subpanel fed from the main gives the outbuilding its own breaker space, which makes it easier to add circuits later and keeps the load organized. We assess the main panel first to confirm the capacity is there, then size and install the subpanel to match what the space needs.
Outdoor lighting installation covers everything from a single motion-sensor fixture at a side entry to a full landscape lighting circuit with multiple runs. Security lighting, flood lights, and pathway lighting all need circuits that are properly protected against moisture and grounded correctly. We run the circuits, mount the fixtures, and confirm the GFCI protection is in place where code requires it.
A welder, air compressor, or table saw draws a load that a standard 15- or 20-amp household circuit was not designed to handle. Running a dedicated circuit sized to the equipment means the breaker does what it is supposed to do rather than tripping under normal use. We size the circuit to the equipment's rated draw, pull the wire from the panel, and install the correct outlet for the connection.
A 60- or 100-amp service that was standard in older construction is not sized for a household running EV chargers, heat pumps, home office equipment, and modern appliances at the same time. A service upgrade to 200 amps involves replacing the panel, the service entrance conductors, and the meter base, and coordinating with the utility for the reconnection. We handle the electrical side from the meter in. Whole-home surge protection pairs naturally with a panel upgrade and is a straightforward addition to the scope.
Scheduling a service call is simple.
Call (650) 614-5391, describe what is happening, and we work out the timing on that first call.
We are available at any hour, any day, so there is no separate process for an evening or weekend call. Emergency calls are answered, and short-notice work is something we can often accommodate.
For rental properties and businesses that need to stay operational, we work around occupancy. Electrical work in a tenant-occupied unit or a retail space that cannot close for the day requires coordination, and we factor that in when the job is scoped. The visit details are confirmed before we arrive so there are no open questions about access or timing.
If the problem is urgent, such as a sparking outlet, a panel that is buzzing or warm to the touch, or a loss of power to part of the building, call now rather than waiting to gather more information. Describing what you are seeing is enough. We ask the questions from there.
When we open a wall or a panel and find wiring that was done without a permit, sized incorrectly, or connected in a way that does not meet current standards, we explain what we found before we do anything else. The goal is not to expand the scope, it is to tell you what is there and what the options are.
Some prior work can be corrected at the connection point without replacing the whole run. Aluminum branch-circuit wiring, for example, is often addressed with listed connectors and devices at each termination rather than a full rewire. Other situations, such as wiring that has been overloaded to the point of insulation damage or circuits that were run without proper grounding, require replacement rather than repair. We tell you which one applies and why, and the decision about how to proceed stays with you.
Knob-and-tube wiring was installed in homes built before the mid-twentieth century and is present in some of the older housing stock in Campbell and the surrounding area. It is not grounded, it was not designed for the loads a modern home runs, and insulation added around it over the years can cause it to overheat. Whether a home with knob-and-tube needs a partial or full rewire depends on the condition of the wiring, the extent of the coverage, and what the home is being asked to do. We assess it and give you a clear picture before any work is scoped.
We handle electrical work throughout Campbell and the nearby communities across Santa Clara County. That includes Cambrian Park, Fruitdale, Burbank, Monte Sereno, and Los Gatos. Residential and commercial calls across this part of the county reach us for everything from single-circuit repairs to full service upgrades.
If your property is in or around Campbell, we cover it. Coverage and availability are both confirmed on the call, so a quick question about your address is part of the first conversation. For the full list, go to our list of electrical services.
Often, yes. Many older homes have sections of wiring that are in good condition and do not need to be replaced. We assess what is there, identify what needs to be updated to support the new work, and give you a clear picture of the minimum scope required versus what a full rewire would involve.
Children should be kept away from the work area and from the panel during the visit. For most jobs, the rest of the house is accessible. For larger jobs involving a full shutdown or work in multiple areas, it is worth discussing the scope on the call so you can plan the day accordingly.
Adding both at once puts real demand on a panel that was sized for a lighter load. We assess the existing service capacity before either circuit is added, because the panel may need an upgrade to carry both safely. The two systems are scoped together on the call so you get a single clear picture of what the work involves and what it costs.
Permit requirements depend on the scope of the work and whether it falls on private property or involves the service entrance. We confirm what applies at your specific address before any work is scheduled, and we handle the coordination on our end. You do not need to research the requirements yourself before calling.
We document what has been completed and what remains, and we make sure the property is safe before we leave. Picking the job back up is a matter of calling to reschedule, and we confirm where things stand on that call so nothing is lost between visits.
Describing what you are seeing is enough. A buzzing sound from the panel, a circuit that keeps tripping, lights that dim when the dryer runs, an outlet that stopped working for no obvious reason - these are the details we work from.
Call (650) 614-5391 and we will ask the right questions, scope the job, and give you a rate before anything is scheduled.
We are available at any hour. Call and we will take it from there.
Other towns where we take electrical work: Los Gatos, Saratoga, Cupertino.
Below is a plain-language look at the electrical work we handle for homes, rental properties, and businesses in Campbell and the surrounding Peninsula communities. Each row covers what the service includes, who it fits best, and one practical detail worth knowing before you call. If a job you need is not listed, call and we will tell you whether it falls within our scope and what it involves.
| Electrical Service | What It Covers | When You Need It | Things to Know |
|---|---|---|---|
| Electrical Repairs & Troubleshooting | Dead outlets and failed circuits, Flickering or dimming lights, Burning smells and arc-fault diagnosis, Tracing faults to the source | Any home or business with a symptom that needs a cause | A burning smell near a panel or outlet is not something to monitor and revisit. It warrants a call right away. |
| Electrical Panel & Service UpgradesMost Popular | Panel replacement and load calculations, Service entrance and meter coordination, Subpanel installation for garages and additions, Capacity assessment for EV chargers and appliances | Homes adding EV chargers, major appliances, or an addition to an older panel | Many Campbell homes still carry 100-amp panels that were sized for a fraction of the load a modern household puts on them. A capacity check on the call tells you where you stand. |
| Solar & Battery Backup | Transfer switch and critical-load subpanel, Dedicated circuits for battery systems, Panel integration for backup hardware, Coordination with existing solar infrastructure | Homes with rooftop solar adding battery backup for wildfire-season outages | We handle the electrical hookup and transfer switch work. The solar panels and battery hardware itself fall outside our scope, but we coordinate with the equipment installer. |
Call (650) 614-5391 and we will walk through what the job involves, what it costs, and when we can get it scheduled.
(650) 614-5391